Detailed Product Description

Features

1. Oil - water separator (CPS system) specially designed using coalescing plates

2. Once installed, no maintenance fee applies due to its excellent separation capability

3. Oil particles are sequentially separated by natural pressure

4. Full automatic operation is possible

Performance

-Oil can be removed to the level of 5PPM or less.

-Oil particles bigger than 30 to 60 micron can be 100 percent removed.

-Oil with a temperature of 0 to 100 degrees Celsius and PH 2 to 10 can be processed.

-Oil floating on the surface of water is removed using Pipe Oil Skimmer.

-When oil is mixed with sludge, its specific gravity become similar to that of water and it passes through the oily water separation tank. In that case, it can be completely removed by the adsorbent of the filtering tank.

-It is appropriate for removing 1000 PPM or lower oil

-It is appropriate for the waste water containing a little sludge.

Merits

1. HIGH TREATMENT EFFICIENCY

Be separated with 5ppm or less in average.

2. SEMI-PERMANENTLY

Plate pack is made of polypropylene which is not consumptive but permanent and the inner parts at immovable and the no rolling part. So EPS pack can actually be used semi-pemanently.

3. NO NEED OF MANAGER

There is no need of manager because the separator is successive separation make and simple equipment for everyone to handle.

4. TREATMENT CAPACITY IS NEAR UNLIMITED

Limited of capacity depend on a number of pack in oil water separator. Therefore it is possible for large volume and it has efficiency like small volume.

5. SIMPLE MAINTENANCE AND MANAGEMENT

Cleaning depends on the degree of sludge. In normal, it is the only one maintenance operation with warm water clean is not necessary on occasion.

6. RE-USED OF SEPARATED OIL

Separated oil discharge through oil skimmer of inner and store at storage tank. Therefore separated oil can be re-use.